Redditdiscussion
Is This Stringing Or What The Issue I Am Using
- Print Quality-1 pts
This occurs when the line doesn't stick to the previous layer and gets dragged by the nozzle.
Released Sep 2019
The UltiMaker S3 is a dual-extrusion 3D printer with a 230 x 190 x 200 mm build volume and touchscreen interface, designed for professional applications.
Pick a topic to see the quotes behind it. Topic points add up to the Ranking Net Score.
Total +13 pts
No topic has more negative than positive points.
Is This Stringing Or What The Issue I Am Using
This occurs when the line doesn't stick to the previous layer and gets dragged by the nozzle.
Recently Started Using An Ultimaker S3 Running
Supports are nearly impossible to remove cleanly.
Prints are way too stuck to the glass bed.
Recently Started Using An Ultimaker S3 Running
I often have to sand down the surface because supports are basically part of the model.
Once a print finishes, it's nearly impossible to remove until the glass bed cools down to room temperature
Much better than I ever got on my Ender 3, except for the bridging and a bit of what looks like ringing on the right side of the print.
Searching For A More Soluble Support Material To
getting it to dissolve out of the internal lattice has been extremely difficult.
Horrible Prints On Ultimaker S3
It also looks like your underextrusions happen mostly after a corner.
It gets around halfway done with the print and says it's jammed
I'm Selling My Ultimaker S3 Anyone Interested
Never had any issues and didn't really use it much, so it's practically new.
Horrible Prints On Ultimaker S3
That doesn't look bad for an S3. Are you talking about the ridges near the top of the print?
Ghosting Underextrusion Bridging Issues With
The user has posted images showing ghosting, underextrusion, and bridging issues on a brand new Ultimaker S3.
I'm having problems with poor detail quality on an Ultimaker S3.
Is This Stringing Or What The Issue I Am Using
It's too fast for your hot end. Try slowing down or increasing the temperature.
Printing Using An Ultimaker S3
It's a solid workhorse, just not a fancy one.
If the extruder is grinding filament, you might have too much tension on the extruder arm.
We suddenly had under-extrusion, so bad that the flow sensor sometimes got triggered.
Tap a topic to read its quotes. Topic points add up to the Ranking Net Score.
No topic has more negative than positive points.