Redditdiscussion
Very Happy With The New Member Of The Family My
- Print Quality+1 pts
the best print quality from top to bottom—no layer marks or layer shift issues on large prints that most printers have.
Released Aug 2026
The QIDI Plus5 is a large-format 3D printer with a 320×320×300mm build volume, 370°C nozzle, 65°C chamber heating, 600mm/s max speed, and auto-leveling, priced from $749.
Pick a topic to see the quotes behind it. Topic points add up to the Ranking Net Score.
Total +25 pts
Very Happy With The New Member Of The Family My
the best print quality from top to bottom—no layer marks or layer shift issues on large prints that most printers have.
Having Extrusion Issues With Qidi Plus5
The print head extrudes the starting line, and also prints a bit after (say for around 10 sec) before it completely stops extruding, while the head keeps moving.
Having Extrusion Issues With Qidi Plus5
Now I’m having issues with extrusion. The filament flushes fine but when it comes to printing, it prints around 30 sec and then just stops while the head keeps moving.
Recently purchased a Qidi Plus5 and I’m having extrusion issues. I print with ASA CF at 270C, bed temp 100C and chamber temp 55C. It initially printed really well, maybe 2-3 hours of print time. Now I’m having issues with extrusion. The filament flushes fine but when it comes to printing, it prints around 30 sec and then just stops while the head keeps moving. I suspect it may be heat creep but it printed fine before, so why is this a new issue? Could damp filament cause this (it was very humid recently, even though the filament is always in the dryer box)? I’ve searched online already for the last 2-3 days and I’m really at a loss with what is going on. I’ve reached out to support but they keep asking for pics and videos instead of just providing a fix to keep moving forward. Any insight from the community is most welcome, thank you!
Qidi Plus5 Engineered For Hightemperature
delivers more even and stable temperatures. Better layer adhesion. Less warping. More reliable prints.
Qidi Plus5 Your Versatile Partner For Every
Active chamber and toolhead cooling system support a wide range of materials.
Qidi Plus5 Issue With Pulley And Bed Leveling
I've now gone back and forth with QIDI support email for a few days.
Having Extrusion Issues With Qidi Plus5
When I load the filament however, the gears do click.
Qidi Plus5 Engineered For Hightemperature
delivers more even and stable temperatures. Better layer adhesion. Less warping. More reliable prints.
Qidi Plus5 Issue With Pulley And Bed Leveling
the fix is to make sure "bed leveling" is checked before every print.
Qidi Plus5 Bricked By Firmware Update Maskrom
Support isn't responding to emails
Tap a topic to read its quotes. Topic points add up to the Ranking Net Score.