BettaScore
BettaScore
ELEGOO

ELEGOO OrangeStorm Giga

3d Printer
ELEGOO OrangeStorm Giga
ELEGOO OrangeStorm Giga
1 / 5
RankOlder modelBest 3D Printers
Ranking Net Score-12-12 from reviews0 from votes
Sources2210 positive · 22 negative
Priced at$2,499.99

Released Nov 2023

Shop on AmazonShop on Google
Older model in Best 3D Printers
Priced at$2,499.99

Released Nov 2023

Shop on AmazonShop on Google
-12Ranking net score-12 from reviews and discussions0 from votes on BettaScore22 sources

The Elegoo OrangeStorm Giga is a large-format 3D printer with a massive 800x800x1000mm build volume for extra-large prints, featuring quad-Z motion, auto bed leveling, and a fully enclosed frame.

What reviewers say, by topic

Pick a topic to see the quotes behind it. Topic points add up to the Ranking Net Score.

Total -12 pts

Net positive 3

Net zero 1

Net negative 4

Sentiment
Format
157
22 sources
Redditdiscussion

Elegoo Orangestorm Giga Or Bambu Lab H2s

  • Print Quality-1 pts

    final part tolerance and finish are usually worse than what you'd get from a Bambu or similar.

View source ↗
final part tolerance and finish are usually worse than what you'd get from a Bambu or similar.
Redditdiscussion

Horizontal Banding Orangestorm Giga

  • Print Quality-1 pts

    The second picture shows where the banding occurred during the print.

View source ↗
The second picture shows where the banding occurred during the print.
YouTube
  • Print Quality-5 pts

    it wasn't just the image so indeed it was not just the image it was actually the print itself

  • Speed-5 pts

    overall these two failures are about 4 kilos worth the filament

  • Reliability-5 pts

    overall these two failures are about 4 kilos worth the filament

it wasn't just the image so indeed it was not just the image it was actually the print itself overall these two failures are about 4 kilos worth the filament overall these two failures are about 4 kilos worth the filament
YouTube
  • Print Quality0 pts

    but overall the details came out pretty good

but overall the details came out pretty good
YouTube
  • Size, Design & Access+5 pts

    I'm greatly impressed with the Giga as it does deliver on its promise printing big prints

  • Print Quality+5 pts

    those bolt spins perfectly in there it's tight so good tolerances

those bolt spins perfectly in there it's tight so good tolerances I'm greatly impressed with the Giga as it does deliver on its promise printing big prints
Redditdiscussion

Elegoo Orangestorm Giga Or Bambu Lab H2s

  • Speed-1 pts

    it's much faster and more reliable.

  • Reliability-1 pts

    It's also painful when large prints fail late in the process.

  • Setup & Ease of Use-1 pts

    Bambus are hands-off; the Giga isn't.

View source ↗
it's much faster and more reliable. It's also painful when large prints fail late in the process. Bambus are hands-off; the Giga isn't.
YouTube
  • Reliability-5 pts

    I've I put out so many videos about the problems I've had

I've I put out so many videos about the problems I've had
YouTube
  • Reliability-5 pts

    the machine attempting to do the first print Dove the nozzle into the front left bed

  • Build Plate & Leveling+5 pts

    it should be able to compensate for a 1.4 mm difference over 800 mm

the machine attempting to do the first print Dove the nozzle into the front left bed it should be able to compensate for a 1.4 mm difference over 800 mm
YouTube
  • Build Plate & Leveling-5 pts

    there's four different plates and they all have to be pretty level

there's four different plates and they all have to be pretty level
YouTube
  • Setup & Ease of Use-5 pts

    So of course, this takes a while as it goes to the 100 points on the screen.

So of course, this takes a while as it goes to the 100 points on the screen.
Redditdiscussion

Elegoo Orangestorm Giga Or Bambu Lab H2s

  • Print Quality-1 pts

    the detail and reliability of an enclosed CoreXY printer far exceed the convenience of the Giga's size.

  • Speed-1 pts

    As long as you're okay with some gluing, props made with an enclosed CoreXY will be faster and more detailed.

View source ↗
the detail and reliability of an enclosed CoreXY printer far exceed the convenience of the Giga's size. As long as you're okay with some gluing, props made with an enclosed CoreXY will be faster and more detailed.
Redditdiscussion

Current State Of Orangestorm Giga

  • Print Quality-1 pts

    I just want to use PLA to make single-colored large parts that are consistent and accurate without Z-banding issues.

  • Reliability-1 pts

    Can the printer be consistent without needing a specialist to constantly maintain it? From my research, it looks like the answer is no.

View source ↗
I just want to use PLA to make single-colored large parts that are consistent and accurate without Z-banding issues. Can the printer be consistent without needing a specialist to constantly maintain it? From my research, it looks like the answer is no.
Redditdiscussion

Elegoo Orangestorm Giga Or Bambu Lab H2s

  • Print Quality-1 pts

    the Bambu Lab A1 was significantly better in quality and consistency.

View source ↗
the Bambu Lab A1 was significantly better in quality and consistency.
YouTube
  • Print Quality-5 pts

    the original issue, which was the layer lines.

the original issue, which was the layer lines.
YouTube
  • Print Quality+5 pts

    I've had no wobble or weird banding on any of the prints I've gotten off

  • Build Quality & Safety+5 pts

    I've had no wobble or weird banding on any of the prints I've gotten off

I've had no wobble or weird banding on any of the prints I've gotten off I've had no wobble or weird banding on any of the prints I've gotten off
Redditdiscussion

Elegoo Orangestorm Giga Or Bambu Lab H2s

  • Reliability-1 pts

    I've seen some people print consistently on it, but most people I've talked to say it isn't worth it.

  • Setup & Ease of Use-1 pts

    if you want a smooth experience, go with a smaller machine like the H2D.

View source ↗
I've seen some people print consistently on it, but most people I've talked to say it isn't worth it. if you want a smooth experience, go with a smaller machine like the H2D.
YouTube
  • Reliability+5 pts

    for this I didn't have any clogs

  • Build Plate & Leveling0 pts

    I took the time to level the beds

for this I didn't have any clogs I took the time to level the beds
YouTube
  • Build Plate & Leveling+5 pts

    here is my auto bed leveling mesh you might notice it's pretty darn good

here is my auto bed leveling mesh you might notice it's pretty darn good
YouTube
  • Setup & Ease of Use-5 pts

    you do still need to make sure you're on a very level surface or level defeat out as level as you can so the printer doesn't twist in funny ways

  • Build Quality & Safety+5 pts

    everything is super solid and very well built and feels quite sturdy

you do still need to make sure you're on a very level surface or level defeat out as level as you can so the printer doesn't twist in funny ways everything is super solid and very well built and feels quite sturdy
YouTube
  • Setup & Ease of Use+5 pts

    it was packaged very well. Uh there was a lot of foam and it was good and nothing seemed to be broken or anything like that.

  • Size, Design & Access-5 pts

    Now, I do not suggest unboxing this thing by yourself. This is a very, very heavy machine and it's just not worth hurting yourself

it was packaged very well. Uh there was a lot of foam and it was good and nothing seemed to be broken or anything like that. Now, I do not suggest unboxing this thing by yourself. This is a very, very heavy machine and it's just not worth hurting yourself

What reviewers say, by topic

Tap a topic to read its quotes. Topic points add up to the Ranking Net Score.

Net positive 3

Net zero 1

Net negative 4

Videos and posts
BettaScore

Products ranked by what public reviews say.

Platform
Browse rankings
Company
About UsHow BettaScore Works
Legal
Cookies PolicyTerms of ServicePrivacy Policy
© LSEV USA Corp 2026. All rights reserved.