BettaScore
BettaScore
BAMBU LAB

BAMBU LAB X2D

Printer
BAMBU LAB X2D
BAMBU LAB X2D
1 / 2
RankNo. 32 of 33Best 3D Printers
Ranking Net Score-18-18 from reviews0 from votes
Sources2411 positive · 17 negative
Priced at$649.00

Released Apr 2026

Shop on AmazonShop on Google
No. 32 of 33 in Best 3D Printers
Priced at$649.00

Released Apr 2026

Shop on AmazonShop on Google
-18Ranking net score-18 from reviews and discussions0 from votes on BettaScore24 sources

The Bambu Lab X2D is a second-generation flagship 3D printer with a dual-nozzle system, aiming to deliver high-quality multi-color and multi-material prints with easy support removal.

What reviewers say, by topic

Pick a topic to see the quotes behind it. Topic points add up to the Ranking Net Score.

Total -18 pts

Net positive 1

Net zero 1

Net negative 6

Sentiment
Format
1014
24 sources
Redditdiscussion

My Review Of The X2d After 200 Hours Bambu Lab X2d

  • Print Quality-1 pts

    you also need very large purge volumes to make sure the different materials are fully flushed out so you don't get weakness in your prints or excessive adhesion on your support interface.

View source ↗
you also need very large purge volumes to make sure the different materials are fully flushed out so you don't get weakness in your prints or excessive adhesion on your support interface.
Redditdiscussion

First Real Test With The Bambu Lab X2d Dual

  • Print Quality+1 pts

    Surface quality where the support touched the print was also excellent. Very little cleanup needed, and the detail stayed intact.

View source ↗
Surface quality where the support touched the print was also excellent. Very little cleanup needed, and the detail stayed intact.
YouTube
  • Print Quality+5 pts

    Since these two plastics hate each other, the supports don't stick. So when it's done, they just peel right off. No sanding necessary and no scarring of any kind.

Since these two plastics hate each other, the supports don't stick. So when it's done, they just peel right off. No sanding necessary and no scarring of any kind.
Redditdiscussion

My Review Of The Bambu Lab X2d After 200 Hours Of

  • Speed+1 pts

    Prints that took a long time on my old printer can now be finished much quicker.

  • Setup & Ease of Use-1 pts

    Bambu Studio can be overwhelming when you first start

  • Noise & Fumes-1 pts

    It is quite noisy

View source ↗
Prints that took a long time on my old printer can now be finished much quicker. Bambu Studio can be overwhelming when you first start It is quite noisy
YouTube
  • Speed-5 pts

    What limits print start time is not the heating power itself — but the heat soaking process.

  • Build Plate & Leveling-5 pts

    the full-bed ABS first layer came out ok, but wasn’t perfect. You can see some uneven spots here

What limits print start time is not the heating power itself — but the heat soaking process. the full-bed ABS first layer came out ok, but wasn’t perfect. You can see some uneven spots here
Redditdiscussion

Snapmaker U1 Vs Bambu Lab X2d

  • Reliability+1 pts

    I pre-dry everything and that has made failures extremely low.

View source ↗
I pre-dry everything and that has made failures extremely low.
Redditdiscussion

Received A Damaged Bambu Lab X2d Now Multiple

  • Reliability-1 pts

    Prints suddenly starting to print in mid-air.

View source ↗
Prints suddenly starting to print in mid-air.
Redditdiscussion

Bambu Lab X2d Filament Replacement

  • Reliability-1 pts

    I keep getting extruder overloaded or extruder clogged errors.

View source ↗
I keep getting extruder overloaded or extruder clogged errors.
YouTube
  • Setup & Ease of Use-5 pts

    The X2D, compared to all of the other Bambu Lab printers that I've used, the two other ones that I've used, so it's not a huge sample size, but still, has been the least easy to use.

  • Materials, Multicolor & Versatility-5 pts

    Now TPU is definitely a more difficult material to print on the Bambu Lab printer because unlike PLA or PETG, it can be recognized by the printer but you have to set up your own manual settings for it. So it's not as plug and play

Now TPU is definitely a more difficult material to print on the Bambu Lab printer because unlike PLA or PETG, it can be recognized by the printer but you have to set up your own manual settings for it. So it's not as plug and play The X2D, compared to all of the other Bambu Lab printers that I've used, the two other ones that I've used, so it's not a huge sample size, but still, has been the least easy to use.
YouTube
  • Setup & Ease of Use-5 pts

    The user experience for the second thing within the app can be overwhelming

The user experience for the second thing within the app can be overwhelming
Redditdiscussion

Support Filament For Placf On Bambu Lab X2d

  • Print Quality+1 pts

    it's an incompatible plastic so it doesn't bond, making supports super easy to remove.

View source ↗
it's an incompatible plastic so it doesn't bond, making supports super easy to remove.
Redditdiscussion

Support Filament For Placf On Bambu Lab X2d

  • Print Quality-1 pts

    But neither bonded properly to the PLA-CF. They barely stuck at all and the interface layers failed.

View source ↗
But neither bonded properly to the PLA-CF. They barely stuck at all and the interface layers failed.
YouTube
  • Speed-5 pts

    The P2S took 5 minutes and 49 seconds to start up and calibrate and the X2D took slightly longer at 7 minutes and 29 seconds

  • Print Quality+5 pts

    when I say that worked wonderfully, no markings where the supports were, it's just butter smooth.

when I say that worked wonderfully, no markings where the supports were, it's just butter smooth. The P2S took 5 minutes and 49 seconds to start up and calibrate and the X2D took slightly longer at 7 minutes and 29 seconds
Redditdiscussion

Need Help New To Bambu Lab X2d

  • Reliability+1 pts

    the panda printed without issues from AMS and Aux.

View source ↗
the panda printed without issues from AMS and Aux.
Redditdiscussion

Bambu Lab X2d Aux Nozzle Keeps Getting Blocked

  • Reliability-1 pts

    the aux nozzle gets clogged.

View source ↗
the aux nozzle gets clogged.
YouTube
  • Build Plate & Leveling0 pts

    a little bit of separation with here as well.

a little bit of separation with here as well.
YouTube
  • Materials, Multicolor & Versatility+5 pts

    for ASA, nylon, other engineering materials, the heated chamber basically makes printing those things possible.

for ASA, nylon, other engineering materials, the heated chamber basically makes printing those things possible.
YouTube
  • Materials, Multicolor & Versatility-5 pts

    if you're printing nylons and PCCF in the same print, it's time to step up to a more robust printer that can do higher temperatures and is more reliable anyway.

  • Build Quality & Safety-5 pts

    Coming from Prusa, I'm used to big, sturdy tools that feel like they belong in a workshop, not in your living room.

if you're printing nylons and PCCF in the same print, it's time to step up to a more robust printer that can do higher temperatures and is more reliable anyway. Coming from Prusa, I'm used to big, sturdy tools that feel like they belong in a workshop, not in your living room.
Redditdiscussion

My Review Of The Bambu Lab X2d After 200 Hours Of

  • Setup & Ease of Use+1 pts

    I found the learning curve to be pretty shallow if we are being honest.

View source ↗
I found the learning curve to be pretty shallow if we are being honest.
YouTube
  • Setup & Ease of Use+5 pts

    it needs to run a quick calibration. The good news is this only takes about 30 seconds.

it needs to run a quick calibration. The good news is this only takes about 30 seconds.

What reviewers say, by topic

Tap a topic to read its quotes. Topic points add up to the Ranking Net Score.

Net positive 1

Net zero 1

Net negative 6

Videos and posts
BettaScore

Products ranked by what public reviews say.

Platform
Browse rankings
Company
About UsHow BettaScore Works
Legal
Cookies PolicyTerms of ServicePrivacy Policy
© LSEV USA Corp 2026. All rights reserved.